DOWN PACKING HIGH DENSITY COTTON BALING PRESS
20” x 41” BALE SIZE
MODEL LF2-2041 DOUBLE LIFT BOX
Available with Bale Wrapping in the Box
Standard Production Capacity: up to 25 Bales/Hour capacity
Bale Weight: 180 kg to 230 kg
Capacity up to 35 Bales per hour available upon customer request
The Model LF2-2041 press is a high density, down-packing press capable of compressing up to 25 bales per hour with the ability of having the dressing and strapping done in the box. replica watches
The press is installed on the gin floor. A service platform installed above the boxes provides access to most of the hydraulic controls.
Two heavy duty reinforced pressing boxes with box guides and indexing platform and clamping mechanism.
Lower platen and hydraulically operated press box lifting and rotating group with box locking mechanism.
One double acting ram and press box lifting cylinder assemblies with ram follower block
Press box stripping system with two hydraulic cylinders for raising box to expose compressed bale.
Tramper group including hydraulic tramper assembly.
Hydraulically operated bale ejector.
Floor mounted press control console for automatic or manual operation of all press functions. Includes programmable logic controller (PLC).
 |
UP-PACKING HIGH DENSITY COTTON BALING PRESS
BALE SIZE: 20” X 41”
MODEL UP2-2041 DOUBLE BOX
Up to 18 Bales/Hour capacity
Model UP2-2041 Cotton Baling Press is an Up-Packing High Density Type of a Press and supplied with an Hydraulic Tramping Unit.
Lint Cotton is fed into the Tramping Chamber of the Press with a Pusher working in synchronization with the Hydraulic Tramper.
After filling the box with a Pre-set amount of Cotton, which is controlled by a Pressure Switch in the tramping circuit, the boxes are rotated to the pressing position where the bale is produced.
| Box Sizes: |
41” x 20” |
| Bale Weight: |
200-225 Kg. |
| Pressing Force: |
280 Ton |
| Pre-Filling: |
Hydraulic Tramper/Hydraulic Pusher |
| Bale Dressing: |
Manual in the Box |
| Strapping: |
Manual |
| Bale Weight Control: |
Pressure switch in the Tramping Circuit |
| Voltage: |
415V-50 Hz |
| Control Center: |
Electro-mechanical or PLC |
|
